Reed Notch Info

 

This Modifications can be done on the 97 & Up SX700 & 600 Triple Style Motors and the 97 & Up 500 & 600 Twin Style Motors non Power Valved.

See the attached pictures to show what needs to be notched in the reed stoppers. Notch size is 24mm tapered to 18mm wide and 4 mm deep. You can do this on a bench grinder after you take the reed stoppers off. If you do this notch you don't have to get reed spacers. They do the same thing. This mod and the reed
spacers unblock the intake port for a straighter flow into the case on the top side of the reed stopper (Notch goes Up).

From AKA JR

 

Any questions feel free to email the Webmaster.

 

Totallyamaha is not responsible for any damages that these modifications may cause to your vehicle; any modifications are your responsibility if you choose to do so. We are providing information ONLY. Some of these modifications may VOID your warranty and that is your responsibility to look into. The Totallyamaha users have passed along most of the information found on this site. If you have any questions or concerns about anything on this site talk to your dealer before using any of the information. Totallyamaha will not be liable for any damages or personal injury from any modification performed from this site.