HOW TO MAKE YOUR OWN

ROCKER SKIS

If you want to make your std plastic Yamaha skis into rocker skis like the SX-R's.  See illustration below. These three .060 aluminum plates under the saddle of your Yamaha skis will give it a few more degrees of bend to make a rocker like skis, making your sled carve more precise and lessen the steering effort. The weld on the plates is not mandatory but eases installation. Other means of holding the plates together for installation may be used.

  Any questions feel free to email the Webmaster.

Totallyamaha is not responsible for any damages that these modifications may cause to your vehicle; any modifications are your responsibility if you choose to do so. We are providing information ONLY. Some of these modifications may VOID your warranty and that is your responsibility to look into. The Totallyamaha users have passed along most of the information found on this site. If you have any questions or concerns about anything on this site talk to your dealer before using any of the information. Totallyamaha will not be liable for any damages or personal injury from any modification performed from this site.